§ 200.954. Supplementary specific requirements under the HUD building product standard and certification program for construction adhesives for wood floor systems.
288 words·~1 min read·
/us/cfr/t24/s§ 200.954·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
(a)Applicable standards.
(1)All construction adhesives for field glued wood floor systems shall be designed, manufactured, and tested in compliance with the following American Society for Testing and Materials
(ASTM)standard: D 3498-93 Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems except that the mold and bacteria resistance tests shall not be included.
(2)This standard has been approved by the Director of the Federal Register for incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51, and is available from the American Society for Testing Materials Inc., 100 Barr Harbor Drive, West Conshohocken, PA. 19428.
(b)Labeling. Under the procedures set forth in § 200.935(d)(6) concerning labeling of a product, the administrator's validation mark and the manufacturer's certification of compliance with the applicable standard are required to be on the certification label issued by the administrator to the manufacturer. Each container shall be marked as being in compliance with UM 60a. The label shall also include the manufacturer's name, plant location, and shelf life.
(c)Periodic tests and quality assurance. Under the procedures set forth in § 200.935(d)(8) concerning periodic tests and quality assurance inspections, the frequency of testing for a product shall be described in the specific building product certification program. In the case of construction adhesives for field glued wood floor systems, testing and inspection shall be conducted as follows:
(1)At least every six months, the administrator shall visit the manufacturer's facility to select a sample for testing in a laboratory approved by the administrator.
(2)The administrator shall also review the quality assurance procedures twice a year to assure that they are being followed by the manufacturer. \[63 FR 5424, Feb. 2, 1998\]
Connectionstraces to 1
Traces to 1 document
1 reference not yet in our index
- 1 CFR 51
Citation graph
cites case law
§ 200.954
Supplementary specific requirements under the HUD building product standard and certification program for construction adhesives for wood floor systems.
Cite1 CFR 51
Cites 2Cited by 0 across 0 sources